MATERIAL LIFTS

CLF-4Vacuum lifter CLF4 is the perfect solution for installation of sandwich roof panels. Thanks to its horizontally fixed frame, it allows the handling of the load only horizontally.Power supplyCLF4 is powered by rechargeable batteries that, if necessary, can be easily removed and exchanged. ..

Roto 180 is a Cladding Vacuum Lifter specific for the rotation of the insulated and sandwich panels by 180°. If your need is to turn the panels upside down, because for transport reasons they arrive stacked one against the other, the Roto 180 Vacuum Lifter is the right solution. In addition, t..

UPO3000UPO3000 is a combination of a support tube and movable counterweights with power supply (battery and mains incl. charger). An adapter plate is attached to the front of the support tube, which makes it possible to attach a vacuum lifter. The UPO3000 overhang spreader bar is intended for fl..

UPO800In conjunction with a mini, car or tower crane, the UPO800 overhang spreader bar is used to assemble building elements in areas that are difficult to access, e.g. under a eaves, balcony, canopies or niches. The required overhang can be set in different steps. With the standard radio remote..

DINGLI AMWP7-8100The DINGLI AMWP7-8100 is a self-propelled electric vertical mast work platform with a maximum working height of 6.70 m. It is designed for maintenance, installation and access-at-height applications, particularly in professional environments where low noise levels and zero emissions..

DINGLI PERSONEL LIFT AMWP8-1200 8M WORKING HEIGHT Specially designed to navigate around narrow spaces like warehouses, supermarkets, hotels, and airports, GTWY9.5-1300 is compact and robust. Equipped with advanced safety features, this sleek vertical lift is..

DINGLI PERSONEL LIFT GTWY12.5-1300 Specially designed to navigate around narrow spaces like warehouses, supermarkets, hotels, and airports, GTWY12.5-1300 is compact and robust. Equipped with advanced safety features, this sleek vertical lift is suitable..

OPT0507  Standard ItemsProportional Controls Drivable At Full HeightAutomatic Brake SystemEmergency Stop Button Onboard Diagnostic System Emergency Descent System All Motion AlarmHorn Hour Meter Charger Protection Flashing Beacon double foot pedal inductionNo oil leakage systemInterlocking door Stat..

The M4EB-K is a series of vacuum lifter specific for kitchen tops and can have a lifting capacity of 360 kg or 440 kg. These lifters are powered electric on board vacuum pump, which can be 220V 1phase or 400V 3phases. The manual tilting system allows the movement of the load from vertical to..

M5EB-K is a line of electrically powered vacuum lifters, specifically designed for moving kitchen tops with a capacity of 450 or 550 kg. This series is equipped with five repositionable suction plates along the crosspiece and can be excluded from the vacuum circuit to adapt to the size of th..

The O5EB550K vacuum lifter is a model specific for kitchen tops and has a capacity of 550 kg. This lifter has electric operating system and it’s possible to choose between 220V 1phase or 400V 3phases. The tilting system powered by an hydraulic cylinder, allows an assisted movement of the loa..

VEB6L-FV belongs to a range of vacuum lifters with a fixed vertical structure for lifting glass in a production environment. It is equipped with six in-line suction plates for a capacity of 1000kg. The suction cup can also be configured with the use of only two or four suction plates, thanks..

VEB10+4T FV is part of a range of vacuum lifters with vertical fixed structure for lifting and handling large glass slabs in production area. This big vacuum glass lifter measures 2960 mm wide, extendable up to 4920 mm, thanks to its telescopic structure. The maximum height of the vacuum pad..

VEB10- FV is part of a range of vacuum lifters with vertical fixed structure for lifting and handling large glass slabs in production area. This big vacuum glass lifter measures 2760 mm wide. The maximum height of the vacuum pads is 2030 mm. As optional, it is possible to add the metallic pr..

VEB14 FV belongs to a series of vacuum lifters with a fixed vertical structure for lifting and handling large glass in a production environment. This model is equipped with 14 suction plates that offer a footprint of 2540 x 2110mm. Upon request, it is possible to add the double vacuum circui..

The model VEB4 RCEBE is a modular vacuum glass lifter with electric movements and lifting capacity 400kg. The VEB4 RCEBE features powered tilt 0 – 90° and powered continue 360° rotation. The aspiration, release, tilting and rotating commands are controlled by push button cable command (radio..

The model VEB4 RCEBE PRO is a modular vacuum glass lifter completed with four extension arms for bigger pad spread. Thanks to these extension arms, this lifter can reach four different configurations. The four suction cups can be put in in-line position and allow the lifter to handle long and ..

The VEB4 RCMBM d4 PRO model is an excellent solution for lifting glass of different sizes. Thanks to 4 extensions, supplied as standard, it is possible to adjust the position of the suction cups and adapt the suction cup to various glass sizes. The practical alignment position of the suction..

The model VEB4+4 RCEBE is a modular vacuum glass lifter with electric movements. On VEB4+4 model, the four external suction pads are on removable extension arms that permit to increase the lifting capacity and the pad spread. The pad arms can be removed quickly and easily. In configuration w..

The model VEB4+4 RCEBE d4 is a modular vacuum glass lifter with electric movements. On VEB4+4 model, the four external suction pads are on removable extension arms that permit to increase the lifting capacity and the pad spread. The pad arms can be removed quickly and easily. In configuratio..

The model VEB4+4 RCEBE XL is a modular vacuum glass lifter with electric movements. On VEB4+4 model, the four external suction pads are on removable extension arms that permit to increase the lifting capacity and the pad spread. The pad arms can be removed quickly and easily. In configuratio..

The VEB4+4 RCMBM X / XL is an evolution of the model VEB4+4. On this model, the four external suction pads are on removable extension arms that permit to increase the lifting capacity and the pad spread. The pad arms can be removed quickly and easily. In configuration with 4 pads, the lifting ca..

VEB4 RCEBE is a suction lifter with 4 suction plates of 310 mm in diameter, with a capacity of 400 kg and with electrical power. The suction cup has a 0-90° electric tilting system (horizontal / vertical) and a 360° manual rotation system. The grip and release controls and the rotation and t..

VEB2 RCMBM The VEB2 RCMBM model is vacuum glass lifter with two suction pads d. 310 mm, perfect to lift and handle glass sheets. VEB2 has electric operating system. As standard is available 400V 3 phase or 220V single phase operated system. On request other voltages. The lifter permits to rotate the..

VEB2 RCMBM D4The VEB2 RCMBM model is vacuum glass lifter with two suction pads d. 310 mm, perfect to lift and handle glass sheets.VEB2 has electric operating system. As standard is available 400V 3 phase or 220V single phase operated system.On request other voltages. The lifter permits to rotate the..