Search

ENGINEERED FOR EFFICIENCY, BUILT TO MOVE.Mini crane on a BEFARD TB 10002 crawler chassis stands out for its maneuverability and mobility. Is very efficient at work, yet durable and reliable. Despite its compact structure and low weight. It is characterized by high stability and can lift even h..

Winlet 1000 – lifts 1 tonneThe Winlet 1000 is the largest glass lift with wheel drive and like the Winlet 785 has an impressive reach and the unique double extension of the arm makes the machine extremely compact during transportation.User-friendly, compact designThe Winlet 1000 has a lifting ..

Winlet 1000 CrawlerWinlet 1000 Crawler is a “state-of-the-art” machinery distinguished by being all terrain maneuverable as well as having dynamic levelling of the complete manipulator on both horizontal axes.It’s designed to work in places where other glass lifters must give up!Crawled tracti..

Winlet 1000 Crawler ER – off-road with extended reachWinlet 1000 Crawler ER (Extended Reach) is an upgraded version of our tracked glazing robot. This version has an extemded telescopic arm reaching a maximum horisontal lifting height of just over 6 metres.Crawled traction and low ground pressu..

Transport Platform PH10/H10PH10 is a transport platform for people and materials regulated according to EN 12158 and EN 16719. It is part of the PH10 modular system. Available at 12 m/min (maximum permissible speed according to regulations), or dual speed version 12/24 m/min with inverter (VFC..

Mast Climbing Work Platform P08The SAEclimber P08 MCWP is the smallest mast climber using a strong tubular mast section, it is light and extremely quick in erection as well as easy in use. This mast climber can be erected in less than a day, up to 30 m H and covering an facade area of 540 sqm. Avail..

Construction Hoists  E10 The SAEclimber E10 Passenger & Material hoist is designed according to EN 12159 standard. Available in 2 different motor configurations with the speeds 28 m/min or 36 m/min (with VFC). Payload is 1.000 Kg. The SAEclimber E10 construction hoist is made to be used even in inte..

This innovation is based on the development of a unique device worldwide known as Matrix: a matrix light structure comprising various independent LED modules and on-board information systems. All the hardware, software and firmware elements are100 % Airstar-made. Our products are connected to each o..

The M1B is a series of Vacuum Liftrs which contains a wide range of one plate models with capacities ranging from 100 kg to 1000 kg. The M1B series is powered by on board, rechargeable and long lasting battery. The battery charger is included. The manual tilting system allows a vertical – ho..

The O1B series of vacuum lifters includes a wide range of single-plate models with a capacity ranging from 100 kg to 1000 kg. The O1B series is powered by a single, long-lasting, rechargeable battery (220V charger included). The suction cup features a hydraulic tilting system that allows ver..

The sheet metal vacuum lifter F6B is battery powered by high- capacity rechargeable batteries (battery charger is included). F6B 1000 has a maximum capacity of 1000 kg and 6 suction pads distributed on 3 cross- arms. The pads, equipped with springs, are made of special oil-resistant vulcanized rubbe..

FI6B 1000T is a battery-powered vacuum lifter, specifically designed for handling sheet metal between cantilever racks. It is equipped with six oil-resistant vulcanized rubber suction plates, with a spring system to compensate for load deflection and ensure excellent adhesion to the load throu..

The Vacuum Lifter for sheet metal FTS6B 1000 is a model powered by on board high capacity batteries. The lifter FTS6B 1000 has a telescopic structure, adjustable in several positions.The advantage of the telescopic Vacuum Lifter for sheet metal is to be able to lift, with a single tool, different fo..

Construction Hoist SeriesThe construction hoist is a crucial piece of lifting machinery used in the construction industry, providing vertical access for operators, materials, and equipment. It is primarily used for working at heights, transporting materials, installing equipment, and performing clea..

The 3S LIFT Offshore Davit Crane, specially designed for offshore wind turbine platforms, is your reliable solution for safe and efficient spare parts loading and unloading from supply ships at sea. With a service life exceeding 30 years, this crane features high‑quality components tailored to withs..

The Vacuum Lifter M1A series includes a wide range of single plate models with capacity ranging from 100 kg to 1000 kg. The M1A series is powered by compressed air. The manual tilting system allows a vertical – horizontal movement of the load and vice versa. The maximum capacity of the lifte..

The P1A series of Vacuum Lifters is a range of single pad models with lifting capacity from 125 kg to 1000 kg. The P1A series is powered by compressed air. The pneumatic tilting system allows an assisted movement vertical – horizontal of the load and vice versa, controlled by a joystick on t..

The Vacuum Lifter for sheets metal F6A 1000 is a model with compressed air operating system and requires connection to the pneumatic system. The model F6A 1000 has a maximum capacity of 1000 kg and 6 suction pads distributed on 3 cross-arms. The pads, equipped with springs, are made of speci..

Electric tow tug for up to1000kg!The LT300 is a battery-powered tug with tiller drive. It has been designed to move trolleys and other containers on wheels safely and comfortably, reducing physical effort and improving productivity. It is equipped with an emergency stop that can be easily acti..

 DELTA PNEUMATIC CHAIN HOIST CD.0.PH.0025Sealed and noise reduced planetary gearbox enables heavy duty cycles.» Control for variable speed.» Shock and corrosion resistant body.» Vane lifting motor for maximum torque.» Suitable for potentially dangerous and explosive environments.ATEX certificate upo..

 DELTA PNEUMATIC CHAIN HOIST CD.0.PH.0025Sealed and noise reduced planetary gearbox enables heavy duty cycles.» Control for variable speed.» Shock and corrosion resistant body.» Vane lifting motor for maximum torque.» Suitable for potentially dangerous and explosive environments.ATEX certificate upo..

 DELTA PNEUMATIC CHAIN HOIST CD.0.PH.0025Sealed and noise reduced planetary gearbox enables heavy duty cycles.» Control for variable speed.» Shock and corrosion resistant body.» Vane lifting motor for maximum torque.» Suitable for potentially dangerous and explosive environments.ATEX certificate upo..

 LA 25 load arm - attachment for forks, 1600 mm length, 1000 kg load capacityThe load arm made of high-quality steel can be easily picked up and used by the forks of a forklift truck thanks to the built-in fork pockets. The load arm has a 25° inclination. The lifting of the load is determined by th..

Load arm LAT 25 - attachment for forks, 160m length, 1000 kg load capacityWith the load arm type LAT 25, Bauer Südlohn offers a working device that is able to greatly expand your activities in the company and warehouse. Use the load arms (crane arms) to be able to lift and transport goods and loads..

BEFARD XP 1002Hoist capacity: 1000 kg. Number of suction cups: 14 pieces.BEFARD vacuum grippers are available in a variety of variants in terms of hoist capacity and number of suction cups. Various versions of the BEFARD XP vacuum grippers are tailored to various user needs. 360° manual rotati..

 BEFARD BXThe BEFARD BX1000 industrial manipulators can perform three hydraulic functions: gripping, pivoting and tilting. They are attached to the crane extension with a flange.They are attached to the extension of a crane or excavator with a flange. Irreplaceable in the power industry, telecomm..

BEFARD XPR 500Hoist capacity:500kg Vacuum gripper BEFARD XPR 500 is a suction cup for mounting and moving windows, large-size tiles and other flat surfaces. It has a built-in high-capacity battery that allows you to work for a long time and charge the gripper at night. The device is reliable an..