Search

COME UP winch rotating stands CRL-2508 for loads up to 250kg suitable for the CP-200. For even greater ease in lifting your loads you can get the right support base that fits exactly with the cp-200 winch.Τhe winch is not included* >..

Set of wheels with breaks suitable for ELC-710.Easy to install.You can transfer the machine with the cargo loaded with ease...

Set of wheels with breaks suitable for ELC-720.Easy to install.You can transfer the machine with the cargo loaded with ease...

BT95Lifting bar for use in combination with mechanical locking clamps (Cod. 4489) and APS90 or APS80 lever.Sturdy crossbar with slots for center distance adjustment and locking of hooks terminals.Construction in galvanized steel with laser cut slots. Allows to grab axel spacing distance of slots mm ..

COME UP winch bracket CRH-0710 for loads up to 250kg. For even greater ease in lifting your loads you can get the right support base for your winch...

COME UP winch holders CRT-2510 rotating for loads up to 300kg. For even greater ease in lifting your loads you can obtain the appropriate support base that matches the following models: CP-200, CP-300, CWG-30075...

COME UP winch holders CRL-2511 rotating for loads up to 500kg. For even greater ease in lifting your loads you can obtain the appropriate support base that matches the following models: CWG-10151, CWG-30151...

Square loading tray / shelf designed to be used with material lifts.– By placing this adaptor on top of the ELC lifts you will gain 40 mm in height.– The BC-06 adaptor is made from steel and has a black anti-scratch EPOXY paint finishRef. BC-06/MSquare loading tray / shelf with a Ø 35 mm spigot..

Practical adaptor to lift loads that during the installation process require a rolling action, such as window shutters, roller door shutters etc. (Net Weight: 8.60 Kg) It is made up of 4 parts with wheels that are inserted and secured in the required position along the FORKS (60×60 mm) of the T..

Steel container with a zinc plating to hold counterweights, designed to be use with the B, C and D range TORO Lifters. This practical container holds 5 ref. CW-01/20 counterweights. It has a quick and easy installation using magnetic locking pins and 2 handle holes to easily move it around.      ..

This load hook adaptor converts TORO material lifts into a mobile crane, specially designed to lift loads where the lifting tower needs to be positioned as close as possible to the work area at the same time offering a high load capacity.This practical heavy duty load arm with a hook is secure..

Boom arm adaptor for TORO Material Lifters B Range. Net weight: 11.80 Kg5 different spots...

To make the best and most efficient use of your TORO material lift, these fork extensions allow you to lengthen your lifter’s forks from the standard model’s 60 cm to 100 cm.The ACT-02 adaptor is made up of two parts that slide on to the TORO material lift FORKS (60×60 mm) and are secured using neod..

20 kg weight made in cast steel and painted in black. You can use up to 5 of these counterweights in our holder reference CB-01. Net weight:           20 kg Measurements:   255 x 125 x 200 mm Colour:                  Black Material:               Cast Steel..

With this practical and very safe system, you have the possibility to raise and lower the TORO material lifts electrically (ranges B, C and D); converting the manual towers into electric towers. The ‘ELECTRIC’ system is a very useful accessory which allows you to quickly an..