-100x100w.png)
-100x100w.png)
Search Criteria
Products meeting the search criteria
%20KSF%20Europe-258x258w.png "KSF GLS 340 | Telescopic Electric Glass Lifter 3.40 m - 70 kg")
Hot
Best seller!!
Manufacturer: KSF
Model: 1295
No need to use any tools for the operationIt take only 30 seconds to complete machine set-up.Telescoping mastsThe overall stability is ensured by 4 feet equiped with locking wheels for use also on sloping groundA level ensure the proper set-up while ajusting the feetCan be transported by van or esta..
0.00€
0.00€ (With Tax)
Hot
Sale
Best seller!!
Manufacturer: KSF
Model: 1294
No need to use any tools for the operationIt take only 30 seconds to complete machine set-up.Telescoping mastsThe overall stability is ensured by 4 feet equiped with locking wheels for use also on sloping groundA level ensure the proper set-up while ajusting the feetCan be transported by van or esta..
0.00€
0.00€ (With Tax)
Hot
Sale
Best seller!!
Manufacturer: RIGHETTI
Model: 1567
The CL1-6 is the No. 1 vacuum lifter specifically for handling and installing insulated panels!CL1-6
is the vacuum lifter specific for handling and installing insulated
panels. Due to its modular frame, it can be adapted to install both wall
and roof panels. CL1-6 is equipped with 6 suction pa..
0.00€
0.00€ (With Tax)
-258x258w.png "Vacuum for lifting and installation wall and roof panels Cladding lifter CL-W 375 kg")
Sale
Best seller!!
Delivery up to 30 days
Manufacturer: RIGHETTI
Model: 1565
Cladding lifters CL-W
The CL-W is dual vacuum circuit vacuum lifter for lifting and installation of wall panels.
Lifting capacity 375 kgbattery operating systemone suction pad divided in four partstilting system horizontal / vertica..
0.00€
0.00€ (With Tax)
Delivery 25-30 wo.days
Manufacturer: RIGHETTI
Model: 2083
CLF-4Vacuum
lifter CLF4 is the perfect solution for installation of sandwich roof panels.
Thanks to its horizontally fixed frame, it allows the handling of the load only
horizontally.Power
supplyCLF4 is
powered by rechargeable batteries that, if necessary, can be easily removed and
exchanged. ..
0.00€
0.00€ (With Tax)
Delivery 25-30 wo.days
Manufacturer: COME UP
Model: 5552
Come Up Slim 12.5s 5.6 Ton Severe Duty Winch
12V DC severe duty winch rated at 12,500 lb (5.6 tons) pulling capacity, designed to exceed expectations.Heavy-duty series wound motor with thermal switch protects against overheating.16 evenly spaced pin holes with an ergonomic T-handl..
0.00€
0.00€ (With Tax)
Manufacturer: COME UP
Model: 5551
COMEUP Slim 9.5rs Trail Edition4.3 Tonne Severe Duty Winch
The Trail Edition features the innovative BossHook M and a specialized winch fuse kit for superior functionality and protection.12 V DC severe-duty winch rated at 9,500 lbs pulling capacity, meeting or exceeding expectations.Slim pr..
0.00€
0.00€ (With Tax)
Delivery 25-30 wo.days
Manufacturer: ITALIFTERS
Model: 5450
Plastic wedges that are inserted into the corners of manhole covers to prevent noise, creaking and loosening of the cover within its frame.The shims are not simple “nooks of plastic“ but are manufactured in a polyurethane of high quality with particular non-symmetrical configuration and a wedge-shap..
0.00€
0.00€ (With Tax)
Hot
Sale
Best seller!!
Delivery up to 30 days
Manufacturer: RIGHETTI
Model: 1566
Cladding lifters CL1-4 250 kg
The CL1-4 is dual vacuum circuit vacuum lifter with modular frame for lifting and installation of wall and roof panels.
Lifting capacity 250 kgbattery operating system4 specific suction pads for rib or trapezoidal panelsmodu..
0.00€
0.00€ (With Tax)
DELIVERY UP TO 15-25 WO.DAYS
Manufacturer: RIGHETTI
Model: 3749
Cladding lifters CL1-8 500 kg Vacuum lifter CL1-8Dual vacuum circuitFor vacuum lifters intended to be used in a building area, the regulations EN 13155 required a secondary positive holding device or there shall be two vacuum reserves each fitted with no..
0.00€
0.00€ (With Tax)
-26 %
DELIVERY UP TO 15-25 WO.DAYS
Manufacturer: CARGOMASTER
Model: 1803
Puncture-Proof TiresUpgrade your cart with puncture-proof tires for maximum safety and reliability. Perfect for demanding or rough surfaces, they prevent punctures and reduce downtime during work.
Benefits:No risk of puncturesIdeal for heavy loads and continuous use
Durable on rough or sli..
115.00€
192.20€ (With Tax) 142.60€ (With Tax)
-26 %
Manufacturer: CARGOMASTER
Model: 2645
Rims made of hard plastic.Rims from reinforced plasticEasy transport of heavy loads.Fits models: C120..
115.00€
192.20€ (With Tax) 142.60€ (With Tax)
Delivery 25-30 wo.days
Manufacturer: COME UP
Model: 1256
Seal Gen2 9.5rs
12V DC severe duty winch rated at 9,500 lb pulling meets or exceeds your expectations.Heavy duty series wound motor delivers superior torque output and
faster line speed. A motor equipped with a thermal protection switch16 equally positioned pin holes with a stainless steel ergono..
0.00€
0.00€ (With Tax)
Delivery 25-30 wo.days
Manufacturer: COME UP
Model: 1257
Seal Gen2 9.5s12V DC severe duty winch rated at 9,500 lb pulling meets or exceeds your expectations.Heavy duty series wound motor equipped with thermal switch alters when motor over-heating.16 equally positioned pin holes with a stainless steel ergonomic
T-handle make it possible to reposition in ..
0.00€
0.00€ (With Tax)
Delivery 25-30 wo.days
Manufacturer: COME UP
Model: 1258
Seal Gen2 9.512V DC severe duty winch rated at 9,500 lb pulling meets or exceeds your expectations.Heavy duty series wound motor equipped with thermal switch alters when motor over-heating.16 equally positioned pin holes with a stainless steel ergonomic
T-handle make it possible to reposition in 2..
0.00€
0.00€ (With Tax)
Showing 1 to 15 of 15 (1 Pages)