-100x100w.png)
-100x100w.png)
New
Delivery 25-30 wo.days
AIR VACUUM LIFTER for metal sheets RIGHETTI F6A 1800kg
- Stock: Delivery 25-30 wo.days
- Model: 3882
0.00€
0.00€
(With Tax)
The Vacuum Lifter for sheets metal F6A 1800 is a model with compressed air operating system and requires connection to the pneumatic system.
The model F6A 1800 has a maximum capacity of 1800 kg and 6 suction pads distributed on 3 cross-arms.
The pads, equipped with springs, are made of special oil-resistant vulcanized rubber, specific for sheet metal.
The lifter can be produced with different crossbeam lengths, from L1500 mm to L4000 mm (different lengths on request).
Adjusting the position of the pads and arms allows you to adapt the vacuum lifter to the different sizes and shapes of the sheets metal.
The F6A 1800 model has a steel reinforced supporting structure and a horizontal fixed frame.
Related Products - Accessories
Delivery 25-30 wo.days
The Vacuum Lifter for sheet metal FS6 EB 500 is an electric powered model. It is possible to choose between 400V three-phase
or 220V single-phase. T..
0.00€
0.00€ (With Tax)
New
Delivery 25-30 wo.days
The sheet metal vacuum lifter FS6B is battery powered by high capacity
rechargeable batteries (battery charger is included). FS6B has a maximum
ca..
0.00€
0.00€ (With Tax)
-258x258w.png "ELECTRIC VACUUM LIFTER for metal sheets RIGHETTI FS8EB 600kg")
Delivery 25-30 wo.days
The Vacuum Lifter for sheet metal FS8 EB 600 is an electric powered
model. It is possible to choose between 400V three-phase or 220V
single-phase...
0.00€
0.00€ (With Tax)
Delivery 25-30 wo.days
The Vacuum Lifter for metal sheet F6EB is a model with electric
operating system, it’s possible to choose between 400V three-phase or
220V single-..
0.00€
0.00€ (With Tax)
-258x258w.png "ELECTRIC VACUUM LIFTER for metal sheets RIGHETTI F6EB 1800KG")
Delivery 25-30 wo.days
The Vacuum Lifter for metal sheet F6EB is a model with electric
operating system, it’s possible to choose between 400V three-phase or
220V single-..
0.00€
0.00€ (With Tax)
Delivery 25-30 wo.days
The Vacuum Lifter for sheet metal FTS6EB 1000 is a model with
electric operating system and it can be produced with voltage 220V
1phase or 400V 3p..
0.00€
0.00€ (With Tax)
Delivery 25-30 wo.days
The Vacuum Lifter for sheet metal F8EB is a model with electric
operating system, it can be produced 400V three-phase or 220V
single-phase. The mo..
0.00€
0.00€ (With Tax)
New
Delivery 25-30 wo.days
The Vacuum Lifter for sheet metal F8EB is a model with electric operating system, it can be produced 400V three-phase or 220V single-phase. The model ..
0.00€
0.00€ (With Tax)
New
Delivery 25-30 wo.days
The Vacuum Lifter for sheet metal F8EB is a model with electric
operating system, it can be produced 400V three-phase or 220V
single-phase. The mo..
0.00€
0.00€ (With Tax)
New
Delivery 25-30 wo.days
The Vacuum Lifter for sheet metal F10EB is a model with electric
operating system 400V three-phase or 220V single-phase. The model F10EB
2000 has ..
0.00€
0.00€ (With Tax)
