RIGHETTI

The Vacuum Lifter for sheet metal FTS6B 1000 is a model powered by on board high capacity batteries. The lifter FTS6B 1000 has a telescopic structure, adjustable in several positions.The advantage of the telescopic Vacuum Lifter for sheet metal is to be able to lift, with a single tool, different fo..

The model P8A is a specific vacuum lifter for large format porcelain slabs, with eight vacuum pads d. 200mm. The series P8A features compressed air operating system and powered tilting system 0-90° with pneumatic cylinder that makes it easier to tilt your slabs from vertical to horizontal po..

The “S” series is a range of pneumatic vacuum lifters, characterised by a low height and a lightened structure.Thanks to the low height under the hook, the low vacuum lifters of the “S” series can also be used in those contexts where height problems arise. The SF4K-PN vacuum lifters allow as..

The M2A is a series of Vacuum Lifters which contains a wide range of 2-plates models with capacities ranging from 250 kg to 1500 kg. The M2A series is compressed air powered. The manual tilting system allows a vertical – horizontal movement and vice versa. The maximum capacity of the lift de..

The M4A is a series of vacuum lifters which contains a wide range of 4-plates models with capacities ranging from 500 kg to 2000 kg. The M4A series is compressed air powered. The manual tilting system allows a vertical – horizontal movementand vice versa. The maximum capacity of the lift dep..

The P3A series of Vacuum Lifters is a range of 3-pads models with lifting capacity from 375 kg to 2000 kg. The P3A series is powered by compressed air. The pneumatic tilting system allows an assisted movement vertical – horizontal of the load and vice versa. The maximum capacity of the lifte..

The P4A-L series of Vacuum Lifters is a range of 4 in-line pads models with lifting capacity from 500 kg to 2000 kg. The P4A-L series is powered by compressed air. The pneumatic tilting system allows an assisted movement vertical – horizontal of the load and vice versa, controlled by a joyst..

The S3-PN is a series of pneumatic vacuum stone lifters with lowered frame and lifting capacity from 375kg up to 750kg. The tilting system is powered by a pneumatic cylinder which allows the movement of the load from vertical to horizontal and vice-versa. This lifter is very versatile, by ex..

The P3A-K is a series of vacuum lifters which are specific for kitchen tops and have a maximum lifting capacity of 330 kg. This lifter is powered by compressed air. The pneumatic tilting system allows an assisted movement of the load from vertical to horizontal and vice versa, controlled by ..

The Vacuum Lifter M1A series includes a wide range of single plate models with capacity ranging from 100 kg to 1000 kg. The M1A series is powered by compressed air. The manual tilting system allows a vertical – horizontal movement of the load and vice versa. The maximum capacity of the lifte..

The M3A-K series is a range of vacuum lifters specific for kitchen tops with lifting capacity up to 330 kg. This lifter is powered by compressed air. The manual tilting system allows an assisted movement of the load from vertical to horizontal and vice versa. Equipped with an on-off sliding ..

The model P24A is a specific vacuum lifter for large format porcelain slabs and very fragile slabs, with 24 vacuum pads d. 200mm. Porcelain slabs are usually over 3 meters in size and thicknesses starting from 3 mm and their handling requires more attention. The Vacuum Lifter P24A500 for por..

The P4A-K is a series of vacuum lifters which are specific for kitchen tops and have a maximum lifting capacity of 440 kg. This lifter is powered by compressed air. The pneumatic tilting system allows an assisted movement of the load from vertical to horizontal and vice versa. Equipped with ..

The model P5A625K-X is a transformable vacuum lifter with 5 pads and lifting capacity 625 kg. Thanks to two extension arms (L 830mm), this lifter can change configuration from inline-pads, suitable for kitchen tops, to cross-pads, suitable for big slabs. The standard central beam is 2400mm l..

The S4-PN is a series of pneumatic vacuum stone lifters with lowered frame and lifting capacity 500kg. The tilting system is powered by a pneumatic cylinder which allows the movement of the load from vertical to horizontal and vice-versa. It has 4 rectangular vacuum pads mm 480x230. The slop..

The model VA2+2T-RP is a vacuum glass lifter specific for indoor use, as it is powered by compressed air. It is equipped with two centrally fixed suction pads and two suction pads placed on removable and telescopic arms. The control unit is telescopic as well in order to offer proper managem..

The model V84 BP is a vacuum glass lifter specific for indoor use, with eight suction pads d. 310 mm, compressed air powered with lifting capacity 800Kg. The pads are replaceable along the arms; and the arms are replaceable along the central beam, which is long 2500 mm. Thank to its pneumati..

The model V84 RCMBP is a vacuum glass lifter specific for indoor use, with eight suction pads d. 310 mm, compressed air powered, with lifting capacity 800Kg. The pads are replaceable along the arms; and the arms are replaceable along the central beam, which is long 2500 mm, as standard. Than..

The model R1 is a versatile and professional vacuum glass lifter specific for use in production, with four suction pads d. 310 mm, compressed air powered and lifting capacity 400Kg. Thank to its two pneumatic cylinders, the R1 features pneumatic 90° rotation and pneumatic 90° tilt, controlle..

VA1-FV is part of a range of vacuum lifters with vertical fixed structure for lifting and handling glass slabs in production area. This lifter has just one round suction pad d. 390mm, it’s compressed air powered with Lifting capacity 150kg. It is equipped with an audio-visual alarm control u..

The model VA2 RCMBM is a vacuum glass lifter specific for indoor use, with two suction pads d. 310 mm, compressed air powered with lifting capacity up to 200Kg. The pads are replaceable along the arms in different positions. The lifter features manual 360° rotation and manual 0 – 90° tilt. I..

The model VA2 RP is a vacuum glass lifter specific for indoor use, with two suction pads d. 390 mm, compressed air powered with lifting capacity up to 200Kg. The lifter features a vertically fixed frame combined with a 90° pneumatic rotation. The rotation is performed with the aid of a pneum..

The VA2RP180 d4 model is a suction cup lifter for glass, for internal use, powered by compressed air. It has two round suction plates with a fixed position, which provide a maximum footprint of 1740x390 mm. The suction cup, equipped with a fixed vertical structure, allows the 180° pneumatic ..

The model VA4 BP is a vacuum glass lifter specific for indoor use, with four suction pads d. 310 mm, compressed air powered with lifting capacity 400Kg. The pads are replaceable along the arms and the arms are replaceable along the central beam, which is long 1500 mm. Thank to its pneumatic cy..

The model VA4 RCMBM is a vacuum glass lifter specific for indoor use, with four suction pads d. 310 mm, compressed air powered with lifting capacity 400Kg. The pads are replaceable along the arms in two different positions.The lifter features manual 360° rotation and manual 0 – 90° tilt.Equi..

The model VA4 RPBP is a vacuum glass lifter specific for indoor use, with four suction pads d. 310 mm, compressed air powered with lifting capacity 400Kg. The pads are replaceable along the arms and the arms are replaceable along the central beam, which is long 1500 mm. The lifter features p..

The model VA4 RCMBP is a vacuum glass lifter specific for indoor use, with four suction pads d. 310 mm, compressed air powered with lifting capacity 400Kg. The pads are replaceable along the arms; and the arms are replaceable along the central beam, which is long 1500 mm. The lifter features..

The model VA2RPBP is a vacuum glass lifter specific for indoor use, with two suction pads d. 310 mm, compressed air powered with lifting capacity up to 200Kg. The pads are replaceable along the beam in different positions. The standard central beam is 1500mm long, on request different length..