Search

VB2 RCMBM 200kg Dual vacuum circuitFor vacuum lifters intended to be used in a building area, the regulations EN 13155 required a secondary positive holding device or there shall be two vacuum reserves each fitted with non return valves.Each vacuum reserve shall be connected to a separate set of vac..

VB4+4 RCMBM d4 X/XL is an evolution of our VB4+4. This model has 4 central pads and 4 pads on removable arms. The arms are easily inserted into the main structure and, depending on requirements, can change the capacity and grip size of the suction pads. With a 2-pad configuration the vacuum li..

VB4+4 RCMBM d4 X/XL is an evolution of our VB4+4. This model has 4 central pads and 4 pads on removable arms. The arms are easily inserted into the main structure and, depending on requirements, can change the capacity and grip size of the suction pads. With a 2-pad configuration the vacuum li..

The VBT4 PRO is a version of the standard VBT4 vacuum glass lifter completed with four extension arms for bigger pad spread. Thanks to its extension arms, this lifter can reach four different configurations. The four suction cups can be put in in-line position and allow the lifter to handle long and..

The VB4 d4 is a below-the-hook vacuum lifter suitable for lifting and handling glass units weighing up to 600 kg. Vacuum glass lifter VB4 RCMBM d4 is battery powered by rechargeable batteries that, if necessary, may be easily removed and quickly replaced (battery charger included). The 4 sucti..

The VB4+4 RCMBM is one of our best selling vacuum lifter. On VB4+4 model, the four external suction pads are on removable extension arms that permit to increase the lifting capacity and the pad spread.The pad arms can be removed quickly and easily. In configuration with 4 pads, the lifting c..

The VB4+4 RCMBM d4 is one of our best seller vacuum lifters! On VB4+4 model, the four external suction pads are on removable extension arms that permit to increase the lifting capacity and the pad spread. The pad arms can be removed quickly and easily. In configuration with 4 pads, the lifti..

The VB4+4 RCMBM X / XL is an evolution of the model VB4+4. On this model, the four external suction pads are on removable extension arms that permit to increase the lifting capacity and the pad spread. The pad arms can be removed quickly and easily. In configuration with 4 pads, the lifting ..

The model VA2 RCMBM is a vacuum glass lifter specific for indoor use, with two suction pads d. 310 mm, compressed air powered with lifting capacity up to 200Kg. The pads are replaceable along the arms in different positions. The lifter features manual 360° rotation and manual 0 – 90° tilt. I..

The model VA4 RCMBM is a vacuum glass lifter specific for indoor use, with four suction pads d. 310 mm, compressed air powered with lifting capacity 400Kg. The pads are replaceable along the arms in two different positions.The lifter features manual 360° rotation and manual 0 – 90° tilt.Equi..

The VEB4 RCMBM d4 PRO model is an excellent solution for lifting glass of different sizes. Thanks to 4 extensions, supplied as standard, it is possible to adjust the position of the suction cups and adapt the suction cup to various glass sizes. The practical alignment position of the suction..

The VEB4+4 RCMBM X / XL is an evolution of the model VEB4+4. On this model, the four external suction pads are on removable extension arms that permit to increase the lifting capacity and the pad spread. The pad arms can be removed quickly and easily. In configuration with 4 pads, the lifting ca..

VEB2 RCMBM D4The VEB2 RCMBM model is vacuum glass lifter with two suction pads d. 310 mm, perfect to lift and handle glass sheets.VEB2 has electric operating system. As standard is available 400V 3 phase or 220V single phase operated system.On request other voltages. The lifter permits to rotate the..

VEB4 RCMBM D4The VEB4 RCMBM d4 model is vacuum glass lifter with four suction pads d. 390 mm, perfect to lift and handle glass sheets. VEB4 has electric operating system. As standard is available 400V 3 phase or 220V single phase operated system. On request other voltage. The lifter permits to rotat..

VEB4 RCMBMThe VEB4 RCMBM model is vacuum glass lifter with four suction pads d. 310 mm, perfect to lift and handle glass sheets.VEB4 has electric operating system.As standard is available 400V 3 phase or 220V single phase operated system. On request other voltage. The lifter permits to rotate the gl..

VEB4+4 RCMBMThe VEB4+4 RCMBM model is vacuum glass lifter with eight suction pads d. 310 mm, perfect to lift and handle glass sheets. On VB4+4 model, the four external suction pads are on removable extension arms that permit to increase the lifting capacity and the pad spread. The pad arms can be re..

VEB8 RCMBMThe VEB8 RCMBM is a suction cup lifter with 8 central fixed suction plates, with a capacity of 800 kg. The suction cup creates the vacuum thanks to a vacuum pump installed in the lift structure, electrically (400V three-phase or 220 single-phase). The suction cup has a 0-90° manual tilt sy..

VEB8 RCMBM d4The VEB8 RCMBM d4 model is vacuum glass lifter with eight suction pads d. 390 mm, perfect to lift and handle glass sheets. VEB8 has electric operating system. As standard is available 400V 3 phase or 220V single phase operated system. On request other voltage. The lifter permits to manu..

VEB6 RCMBMThe model VEB6 RCMBM is a glass vacuum lifter with 6 vacuum pads d. 310 mm, 600kg capacity and electric operating system, which can be 400V 3phase or 220V 1phase.The vacuum lifter VEB6 features manual 0-90° tilt and manual 360 degree rotation.One vacuum circuit with vacuum tank and sa..

 VB2 RCMBMd4 300kgDual vacuum circuitFor vacuum lifters intended to be used in a building area, the regulations EN 13155 required a secondary positive holding device or there shall be two vacuum reserves each fitted with non return valves.Each vacuum reserve shall be connected to a separate set..

VB4L RCMBM 400KGParking stand The parking stand is a practical option that ensures the stability of the glass vacuum lifter during transport; it is also designed to keep it safe during handling and storage thanks to its solid construction.Parking stands come in three versions: standard, forkable or..

VB4 RCMBM 400kg Dual vacuum circuitFor vacuum lifters intended to be used in a building area, the regulations EN 13155 required a secondary positive holding device or there shall be two vacuum reserves each fitted with non return valves.Each vacuum reserve shall be connected to a separate set of vac..

Dual vacuum circuit  VB4 RCMBM/pro 400kg For vacuum lifters intended to be used in a building area, the regulations EN 13155 required a secondary positive holding device or there shall be two vacuum reserves each fitted with non return valves.Each vacuum reserve shall be connected to a separate set ..

VB4+4 RCMBM 800kg The VB4+4 RCMBM is one of the most popular and the mostly used vacuum lifter, with battery operating system, dual vacuum circuit and four extension pad arms for bigger pad spread. Lifting capacity 400 / 800 kgbattery operating system4 fixed sucti..

VB-CG series offers a wide range of suction lifters specific for handling curved glass from400  to 600kg.Power supplyVB-CG vacuum lifters are designed for working on construction site as they are powered by removable and rechargeable batteries. Battery charger is included.MovementsThese models featu..

The VB8 RCMBM is the vacuum glass lifter, with battery operating system, dual vacuum circuit and lifting capacity 800kg. lifting capacity 800 kgbattery operating system8 suction pads d.310 mmpad spread mm 1420×970manual 90° tilt with automatic stopmanual 360° rotation, with possibility of ..

VB6 RCMBM 600 kgThe VB6 RCMBM is 6 pads vacuum lifter with manual 360° continuous rotation and manul tilting system 0-90°.The pad spread dimension is mm 1420 x 678. Vacuum glass lifter VB6 RCMBM is battery powered by rechargeable batteries that, if necessary, may be easily removed and quickly..

VB6 RCMBMd4 900kg The VB6 RCMBM d4  is the vacuum glass lifter, with battery operating system, dual vacuum circuit and lifting capacity 900kg. lifting capacity 900 kgbattery operating system6 suction pads d.390 mmpad spread mm 1810×830manual 90° tilt with automatic stop..