SAECLIMBER - Construction Hoists E15 - 200M 2000KG

Construction Hoists E15

SAEclimber Construction hoist E15 is designed according to EN 12159. Available in 2 different motor configurations with the following speeds: 28 m/min ó 40 m/min (with VFC). Available with a payload of 1.500 Kg or with 2.000 Kg. The E15 is made to be used in intensive working conditions, and with high heights but with a competitive cost. Mast Section compatible with our Only Goods hoist H15 and Transport Platform PH15 as well as our Mast Climbing Work Platform P40. 

ADVANTAGES
Reasons for choosing the E15 model:

• Ideal for Intensive work jobsites.
• Big Capacity.
• Great working heights.
• Large volume cabin.
• Economical but very performant.

SAFETY DEVICES

• Base chassis with certified Rubber shock absorbers
• Cable basket or cable trolley
• Overload device (detection by load cells)
• Ascend & descend limit switch
• Mast ascend & descend emergency limit switch
• Mast detection inductive limit switch
• Power cable anticut limit switch and anti‐tear device, for electric cable protection (avoiding cable rupture)
• Electromechanical limit switch for cage landing door Inductive for cage boarding door
• Ladder limit switch
• Mast and anchorage trapdoor limit switch
• Landing door mechanical limit switch: Do not open if the cabin is not at the floor
• Base enclosure access door electromechanical limit switch : Do not open if the cabin is not at the ground
• Ground enclosure
• Anti‐over‐run mechanical device
• First class Self‐braking motor gear
• External independent parachute  emergency brake (CE certified)
• Terminal Mast section with half rack to avoid overrun
• Platform or roof hatch for erection with safety rails and safety limit switch
• Visual Diagnostic of malfunctioning
• Device for manual descent in case of power failure
• Emergency light with battery or Led  (CE) inside Cabin
• All steel material of the supply, including the cabin, is hot galvanized
• Magnetothermal protections and differential ampere switchetche