SAECLIMBER - Construction Hoists E10 - 120M 1000KG

Construction Hoists  E10 

The SAEclimber E10 Passenger & Material hoist is designed according to EN 12159 standard. Available in 2 different motor configurations with the speeds 28 m/min or 36 m/min (with VFC). Payload is 1.000 Kg. The SAEclimber E10 construction hoist is made to be used even in intensive working conditions, in works in town or when a service elevator is needed. Mast Section is the same as the H10, PH10, PH5 and E05. 

ADVANTAGES
Reasons for choosing the E10 model:

• Ideal for city works or as a service elevator.
• Simple and reliable.
• Fast in assembly.
• Economic but performing.

SAFETY DEVICES

• Base chassis with certified Rubber shock absorbers
• Cable basket or cable trolley
• Overload device (detection by load cells)
• Ascend & descend limit switch
• Mast ascend & descend emergency limit switch
• Mast detection inductive limit switch
• Power cable anticut limit switch and anti‐tear device, for electric cable protection (avoiding cable rupture)
• Electromechanical limit switch for cage landing door Inductive for cage boarding door
• Ladder limit switch
• Mast and anchorage trapdoor limit switch
• Landing door mechanical limit switch: Do not open if the cabin is not at the floor
• Base enclosure access door electromechanical limit switch : Do not open if the cabin is not at the ground
• Ground enclosure
• Anti‐over‐run mechanical device
• First class Self‐braking motor gear
• External independent parachute  emergency brake (CE certified)
• Terminal Mast section with half rack to avoid overrun
• Platform or roof hatch for erection with safety rails and safety limit switch
• Visual Diagnostic of malfunctioning
• Device for manual descent in case of power failure
• Emergency light with battery or Led  (CE) inside Cabin
• All steel material of the supply, including the cabin, is hot galvanized
• Magnetothermal protections and differential ampere switchetche