Vacuum lifters for glass, stone, metal sheet, wood

The vacuum lifter for metal sheet F8A-2400 is a model with compressed air operating system and requires connection to the pneumatic system. The model F8A-2400 has a maximum capacity of 2400 kg, is composed by a crossbar which can be produced in different lengths, on standard models of L3000 ..

The Vacuum Lifter for sheets metal FS4A 250 is a model with compressed air operating system and requires connection to the pneumatic system . The model FS4A 250 has a maximum capacity of 250 kg and 4 suction pads distributed on 2 cross arms. The pads, equipped with springs, are made of speci..

FT10A3000 is a sheet metal vacuum lifter with telescopic frame. Being its length adjustable from 2860mm to 5000mm, it is the perfect vacuum lifter for handling sheet metal of all the standard dimension (6000x2000mm – 4000x2000mm – 3000x1500mm). Moreover, FT10A3000 comes equipped with the pos..

F8A 700 is a suction cup lifter powered by compressed air, versatile, perfect for any use. It has a fixed horizontal frame with tie rods and 8 suction cups with a diameter of 200 mm, distributed on 4 arms, available in different sizes. The position of the suction cups and arms can be modifie..

The M4A-K series is a range of vacuum lifters specific for kitchen tops with lifting capacity up to 440 kg. This lifter is powered by compressed air. The manual tilting system allows an assisted movement of the load from vertical to horizontal and vice versa. Equipped with an on-off sliding ..

The M3A is a series of Vacuum Lifters which contains a wide range of 3-plate models with capacities ranging from 375 kg to 2000 kg. The M3A series is compressed air powered. The manual tilting system allows a vertical – horizontal movement and vice versa. The maximum capacity of the lift dep..

The P1A series of Vacuum Lifters is a range of single pad models with lifting capacity from 125 kg to 1000 kg. The P1A series is powered by compressed air. The pneumatic tilting system allows an assisted movement vertical – horizontal of the load and vice versa, controlled by a joystick on t..

The P2A series of Vacuum Lifters is a range of 2-pads models with lifting capacity from 500 kg to 1500 kg. The P2A series is powered by compressed air. The pneumatic tilting system allows an assisted movement vertical – horizontal of the load and vice versa, controlled by a joystick on the l..

The P4A series of Vacuum Lifters is a range of 4-pads models with lifting capacity from 500 kg to 2000 kg. The P4A series is powered by compressed air. The pneumatic tilting system allows an assisted movement vertical – horizontal of the load and vice versa. The maximum capacity of the lifte..

The M5A-K series is a range of vacuum lifters specific for kitchen tops with lifting capacity up to 550 kg. This lifter is powered by compressed air. The manual tilting system allows an assisted movement of the load from vertical to horizontal and vice versa. Equipped with an on-off sliding ..

The S2-PN is a series of pneumatic vacuum stone lifters with lowered frame and lifting capacity from 250kg up to 500kg. The tilting system is powered by a pneumatic cylinder which allows the movement of the load from vertical to horizontal and vice-versa. The sloped position of the cylinder ..

The P5A550K vacuum lifter is specific for kitchen tops and has a capacity of 550 kg. This lifter is powered by compressed air. The pneumatic tilting system allows an assisted movement of the load from vertical to horizontal and vice versa.Equipped with an on-off sliding valve against the inv..

The model P12A is a specific vacuum lifter for large format porcelain slabs, with twelve vacuum pads d. 200mm. Porcelain slabs are usually over 3 meters in size and thicknesses starting from 3 mm and their handling requires more attention. The Vacuum Lifter P12A350 for porcelain stoneware ha..

The model VA2 BP is a glass vacuum lifter specific for indoor use, with two suction pads d. 310 mm, compressed air powered and a lifting capacity up to 200Kg. The pads are movable along the beam in three different positions. The standard central beam is 1500mm long, but different lengths are..

The model VA2 RCMBP is a glass vacuum lifter specific for indoor use, with two suction pads d. 310 mm, compressed air powered and a lifting capacity up to 200Kg. The pads are repositionable along the beam according to needs. The standard central beam is 1500mm long, but different lengths are..

VA2RP180BP d4 is a pneumatic vacuum glass lifter specific for indoor use, with two suction pads d. 390 mm and working load limit up to 300Kg. The pads are replaceable along the beam in different positions. The standard central beam is 1500mm long, on request different lengths. The lifter fea..

The VA4 RCMBP-R model is a 4-plate model with a diameter of 310 mm and a maximum capacity of 400 kg. The telescopic “comb” structure allows for various configurations, including an in-line configuration for long and narrow glass panes. The suction cup is powered by compressed air. The 0 -90°..

The vacuum lifter for metal sheet F8A-2400 is a model with compressed air operating system and requires connection to the pneumatic system. The model F8A-2400 has a maximum capacity of 2400 kg, is composed by a crossbar which can be produced in different lengths, on standard models of L3000 ..

The vacuum lifter for metal sheet F14A-4200 is a model with compressed air operating system and requires connection to the pneumatic system. The model F14A-4200 has a maximum capacity of 4200 kg, it is composed by a crossbar which can be produced in different lengths and 14 suction pads d. 3..

FT10A800 is a sheet metal vacuum lifter with telescopic frame. Being its length adjustable from 2651mm to 4897mm, it is the perfect vacuum lifter for handling sheet metal of all the standard dimension (6000x2000mm – 4000x2000mm – 3000x1500mm). Moreover, FT10A800 comes equipped with the possi..

The Vacuum Lifter for sheets metal F6A 1000 is a model with compressed air operating system and requires connection to the pneumatic system. The model F6A 1000 has a maximum capacity of 1000 kg and 6 suction pads distributed on 3 cross-arms. The pads, equipped with springs, are made of speci..

The Vacuum Lifter for sheets metal F6A 1800 is a model with compressed air operating system and requires connection to the pneumatic system. The model F6A 1800 has a maximum capacity of 1800 kg and 6 suction pads distributed on 3 cross-arms. The pads, equipped with springs, are made of speci..

The FS8A 600 sheet metal suction cup is an optimal solution for thinner sheet metal, even less than 1 mm. Furthermore, it is also ideal for all those situations in which it is necessary to keep the height as low as possible and is a perfect tool for loading sheet metal on laser cutting. The ..

FT10A2000 is a sheet metal vacuum lifter with telescopic frame. Being its length adjustable from 2761 mm to 5007 mm, it is the perfect vacuum lifter for handling sheet metal of all the standard dimension (6000x2000mm – 4000x2000mm – 3000x1500mm). Moreover, FT10A2000 comes equipped with the possibili..

EasyLifter EZL ISO Mobile , battery-operated manual sunction plateto support the freshly glued ISO discs.The easyLifter iso is designed for battery operation. The handling of this manual vacuum pad is very easy and guarantees a safe and problem-free movement of loads. Two handles are attache..

 BEFARD XR 500Hoist capacity: max. 600 kg. The BEFARD XR 500 vacuum gripper is designed to work in various conditions thanks to its individual configuration. The BEFARD XR 500 series gripper is designed for transporting, lifting and installation of: wall panels, horizontal and vertical ones, ..

BEFARD XP 902Hoist capacity: 900 kg. Number of suction cups: 12 pieces.BEFARD vacuum grippers are available in a variety of variants in terms of hoist capacity and number of suction cups. Various versions of the BEFARD XP vacuum grippers are tailored to various user needs360° manual rotation, ..

BEFARD XP 1002Hoist capacity: 1000 kg. Number of suction cups: 14 pieces.BEFARD vacuum grippers are available in a variety of variants in terms of hoist capacity and number of suction cups. Various versions of the BEFARD XP vacuum grippers are tailored to various user needs. 360° manual rotati..